Skip all navigation and jump to content Jump to site navigation Jump to section navigation.
NASA Logo - Goddard Space Flight Center + Visit NASA.gov region to select the NASA home page region to select the NASA GSFC home page
Aerosol Robotic Network (AERONET)
AEROSOL OPTICAL DEPTH AEROSOL INVERSIONS SOLAR FLUX OCEAN COLOR Maritime Aerosol Network
For receiving updates on AERONET - subscribe to the mailing list by sending an email to aeronet-join@lists.nasa.gov

 +Home

 

Home
AEROSOL/FLUX NETWORKS
CAMPAIGNS
COLLABORATORS
DATA
LOGISTICS
NASA PROJECTS
OPERATIONS
PUBLICATIONS
SITE INFORMATION
STAFF
SYSTEM DESCRIPTION
 
AERONET DATA ACCESS
 
AERONET Site Lists (V3)

+ Text Format

+ Google Earth Format

+ All Lists

 
Transmission Report Status Information
 
 
Status - is the 16-bytes piece of information which CIMEL routinely transmits. Status consists of the "Identificator" byte, and status data as Temperature, Battery Voltage, and different system codes. During normal operation Statuses precede all sequences of measurements or scenarios performed by the instrument in the Auto Mode. The ID byte then identifies the scenario. When abnormal conditions occur, the Status has the troubleshooting information. The ID byte the identifies the nature of trouble.

All statuses can be seen on the report page as "sta*" , where "*" is the ID byte. Please refer to the below tables to determine the meaning of ID bytes.

Abbreviation Measurement
SUN Direct sun measurement
SKY Sky radiance measurement
ALM Almucantar sequence
PP Principal plane sequence
PPP Polar Principal plane sequence
BLACK Dark current measurement

Normal Condition Status CIMEL TYPE
(S-standard, P-Polar)
MEASUREMENT SEQUENCE (scenario)
staA S or P 3 SUN, 3 SKY
staB S or P 3 SUN, 3 SKY, 4 ALM, BLACK
staC S 3 SUN, 3 SKY, 4 ALM, 4 PP, BLACK
staC P 3 SUN, 3 SKY, 4 ALM, 4 PP, PPP, BLACK
staD S or P 3 SUN
staE S 3 SUN, 4 PP
staE P 3 SUN, 4 PP, PPP
staF S 3 SUN, 4 ALM, 4 PP, BLACK
staF P 3 SUN, 4 ALM, 4 PP, PPP, BLACK
Abnormal Condition Status CONDITION
stab S or P Robot error
star S or P Reset error
stah S or P Humidity sensor activated*
stap S or P (version 5.x) Sensor head fails to respond to control box communication request.
stas S or P Filter wheel error

* The activation of Humidity sensor does not mean that there is problem with the instrument. It usually only means that the normal auto operation is interrupted due to wet condition, and is to be resumed after the wet sensor gets dry again.

Additional Information

When two statuses occur with no data between them, e.g., STA STA, the filter wheel is not working properly.

Further definitions to read operational transmission information:
Abbreviation Measurement
NSU Direct sun measurement
SSK Sky radiance measurement
ALR Right Almucantar sequence
ALL Left Almucantar sequence
PP1 Principal Plane
PPP Polarized Principal Plane
BLK Black Current
SKY Sky Channel Measurement
PRS Seaprism sequence
!!! Transmission or encoding problem; could not read data correctly

 
  + Privacy Policy and Important Notices NASA Curator: Ilya Slutsker
NASA Official: Pawan Gupta
Last Updated: April 13, 2021